High-quality sink chip repair Washington

We specialize in repairing the following:

  • Sink Chip Repair
  • Crack Repair for Sinks
  • Resurfacing Your Sink to Look New

Sink Repair Experts

Sink crack and chip repair Washington Porcelain sink chip restoration in Washington

Has your sink suffered a chip or crack? Has the surface of your sink become stained? Is your kitchen sink looking tired, or is your bathroom sink calling for a makeover? You can count on me for all your sink repair needs in Washington. Don't wait for the damage to get worse. Get a free quote now and expert advice on the best way to repair your sink.

Sink repairs are frequently needed because of the constant use they face. Glass bottles, pots, and pans are common culprits of chips and cracks on sink surfaces. Harsh cleaners and soaps can erode the shiny surface of your sink, making it harder to clean and causing dirt to stick. With extensive experience in sink repairs, I can also resurface your sink for full restoration when required. I perform all repairs at your location, and most sink repairs are completed within 1-2 hours. Your sink will be ready to use again in just 24 hours, saving both time and money compared to a full replacement. This is the most cost-effective way to make your sink look brand new without the need for replacement. My sink repairs are guaranteed for 12 months and I’m fully insured. Your sink will be looking brand new again in no time!

Sink chip repair specialists in Washington

Here’s what we offer to our customers in Washington

I’m ready to assist with any of your sink repairs. With years of experience in the hard surface repair industry, I’ve repaired thousands of sinks, baths, and shower trays in homes and businesses across Washington. With my experience, I’ll make sure your sink repair is done right the first time.

Sinks vary widely in types, sizes, and materials - sinks are made in various shapes and sizes and can be made from porcelain, acrylic, fibre-glass, stone resin, marble, and other materials. When doing a sink repair, the most important thing is to first carefully assess the extent of the damage that needs to be repaired. If you just have 1 or 2 simple chips, then I can do a simple chip repair within 1-2 hours. If you have a big crack or hole in your sink, this will take me longer to repair as I'll need to ensure the repair is strong enough to maintain the integrity of the sink. If the whole surface of your sink is damaged or it's discoloured, then I can restore the surface of your sink. This will leave you with a brand new looking sink. When I do resurfacing, I have to set up a spray tent around the sink to make sure that no overspray settles around your bathroom or kitchen fixtures. The process of resurfacing takes the whole day as there is quite a bit of prep work. With any sink repair or sink resurfacing, you'll need to leave it for 24 hours to cure before use before you can use it again. I can repair kitchen sinks, bathroom sinks, utility sinks, bar sinks, and more, and beyond. Basically, anywhere you have a sink, I can repair it. All my repairs are done in-situ so there’s no need to take the sink out or bring it to a shop.

Expert Sink Colour Matching in Washington

A key element of a top-quality sink repair is ensuring the new enamel paint matches your existing sink perfectly. This process must be done by eye on the day of your repair, mixing various tinters into the standard white enamel paint until I get an exact match to your sink. When the new paint isn’t a perfect match, the repair will be visible. This highly specialised skill has been developed over years of hands-on work. While sinks are generally white, the exact shade of white can differ greatly. The shade of white your sink has depends on the manufacturer, its age, usage, and factors like sun damage or chemical discoloration. I pay close attention to get the perfect colour match whenever I perform repairs. If you decide to resurface your entire sink, I will apply a brilliant white finish to restore its original look.

I always use professional-grade materials that aren't available at your local DIY store. To guarantee long-lasting repairs, I’ve sourced the best quality bonder and enamel paint. Since I’ve been using the same materials for years, I can trust that they create lasting, high-quality repairs every time. Other companies may try to cut costs with cheaper materials, but that can lead to failed repairs and subpar results. I stand by my work with a 12-month guarantee on all repairs, unless specified otherwise.

The first step when I do a sink repair is to apply a special bonder to the damaged area and then fill in the damage. After colour matching the new paint to your sink, I apply an additional layer of bonder before spraying on the new enamel. Applying the new enamel with a fine spray gun guarantees that the repair blends in as smoothly as possible.

Whenever I encounter damage on a sink, I have to make sure I know how bad the damage is so I can determine the best way to fix it. For minor chips or scratches, I can complete a quick chip repair in just 1-2 hours. When the damage is widespread, resurfacing the sink is typically the best choice. For a large crack or hole, I can repair it, but I might suggest replacing the sink due to potential structural issues. In this case, if I do the repair, I wouldn’t be able to offer a guarantee on it. However, this is a worst-case situation.

The Step-by-Step Repair Process:

1. I’ll evaluate the damage to your sink from the pictures you send and give you a free quote. After that, we’ll get your repair scheduled.

2. When I get there to complete the repair, I’ll mask the area to protect it and clean the damaged section to prepare for the repair.

3. I’ll use our special bonder to apply a layer, then fill in any holes, chips, cracks, and more.

4. The next step involves adding another layer of bonder and colour matching a fresh enamel paint to your sink.

5. I’ll use a fine spray gun to apply the freshly colour-matched enamel paint to your sink and blend it in as smoothly as possible.

6. Wait for 24 hours before using your sink, allowing the repair to fully harden and cure.

7. Use your sink again as normal!

Professional Sink Repair Specialists in Washington

How long does a sink repair take?

Cast iron sink chip repair in Washington

Most of my sink repairs can be completed in just 1-2 hours. Replacing your sink would take much longer than this repair. If you opt for a sink resurfacing, this will take me a full day to complete, due to the need to mask off the area for protection. This process is still much quicker and cheaper compared to ripping out and replacing your sink. I have experience restoring antique sinks and resurfacing them to make them look brand new. Antique sinks typically feature intricate detailing that is not found on most modern sinks. If you need a sink restored or repaired, I’m here to help.

I perform all my repairs to a very high standard, focusing on durability and making sure the repair isn’t noticeable during normal usage. If you were to shine a torch over the surface, you might notice something, but this isn't something you'd typically do while using your sink. Any reputable repair company will not guarantee an invisible repair, so be cautious of those who do as they likely won’t last long.

Choosing to repair your sink instead of replacing it will save both money and time, and it’s a more environmentally friendly option. Repairing your sink means you won’t be adding unnecessary waste to the landfill.

I’ve been asked by customers if DIY Repair Kits are a good option for repairing their sinks. The issue with DIY Repair Kits is that they include low-quality materials, which means the repair won’t last. The basic tinter in DIY kits makes it challenging to get an accurate colour match. You can absolutely give it a try if you feel confident, but I’ll be here to do a professional repair when you ask me.

How long can I expect my sink repair to last?

All of my sink repairs come with a 12-month guarantee. Sink repairs should last for as long as the rest of the sink itself, and in the unlikely event that one of our repairs fails, it will do so within the first 12 months. In cases of structural or extensive damage, I can’t provide a guarantee, but I’ll make sure to let you know before proceeding. Typically, I recommend replacing the sink in such cases, but if you’d like to keep the original sink, we can still repair it.

Local chipped sink repair in Washington
Trusted sink surface repair Washington
Affordable enamel sink repair Washington

Having worked in Washington and around Tyne-and-Wear my whole life, I’m able to get to you fast!

Professional ceramic sink repair Washington

In just one visit, I can restore your sink!

Sink refinishing service in Washington">

Fixed pricing for your peace of mind.

I guarantee fixed pricing in my quotes, so you can avoid worrying about hidden charges or surprises.

Contact Surface Doctor Washington now for a free quote.

Check out what some of my customers think of my repairs:

“I had a terrible chip in my sink, which was holding a lot of water. You gave me a quote right after I called and came out to fix it. The process was so quick, saving me both time and money compared to replacing my sink. The repair is fantastic, and my sink looks brand new!”
RD - Washington
“We reside in a Grade II listed manor house with original sinks and baths from the 1800s. Wanting to preserve this classic feature of our home, you resurfaced our sinks and baths expertly, restoring them to their original appearance. They will last for decades to come, and we’re so pleased with the results.”
TB - Washington, Tyne-and-Wear
“I had a big hole in my sink, and it was tough to remove, so I decided to repair it. You warned me against repairing it because of the damage, but I asked you to go ahead. The repair is amazing, and it’s still holding up well. I’m really happy with the result.”
VN - Washington, Tyne-and-Wear
"There are not many companies I trust to come into my home, but I was so reassured by how friendly and helpful you were on the phone that I decided to get the repair booked in. My sink honestly looks brand new again, and I can't believe how well the repair blends in with the rest of the sink. It's amazing."
MJ - Washington, Tyne-and-Wear

Does your sink have a chip, crack, or scratch? Just follow these easy steps:

1) Contact me for my professional opinion.

2) Send over photos of the damage.

3) Your quote will be sent to you on the spot.

It’s that easy! I can assist with all of your repair needs in Washington.

Give Us a Call Now
Ceramic Sink Repair Specialists NE37

Specialized Sink Chip Repair Services NE37

Don't stress!
We can be there in Washington & surrounding areas.



Looking for a Porcelain sink repair? Surface Doctor Washington is one of the leading hard surface repair companies in your area, so call me today on 0161 931 9118.

Here are some examples of repairs I can do in Washington

Get to know your local sink crack repair professional in Washington

I’m prepared to help with your sink repairs in your bathroom and kitchen. You can count on me to deliver the highest quality repair. Reach out today if you have any questions about what I can fix.

Just a reminder, when you call me:

  • Washington, NE37 has no call-out fees
  • Fixed pricing for your peace of mind
  • All my repairs come with a 12-month guarantee
Professional ceramic sink repair Washington

Ceramic Sink Restoration Specialists Washington, Tyne-and-Wear

  • Reviewer Trust Pilot
  • Review Date 01-08-2025
  • Reviewed Item Surface Doctor
  • Author Rating ★★★★★