Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. With Surface Doctor Winchester, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. My bath resurfacing is guaranteed for 12 months.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. Repairs to chips and dents are included in the resurfacing service with no additional cost. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Winchester.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. I will sand off the top surface of the bath to take it back to the metal. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. After that, I will apply another layer of bonder on top. 5. Next, I will apply a fresh enamel surface to your bath. 6. Next, I’ll buff the surface to a high shine. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. It’s essential to protect surrounding surfaces, as overspray could cause damage. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. Choosing to repair and restore your bath means you're contributing less to landfill waste. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How long will a bath re-enamelling last?
The restored surface of your bath will remain in excellent condition for many years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Contact me for my expert insight.
2) Send in pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
It’s as simple as that! I’m here to help with all your repair needs in Winchester.
Need a bath repair? Surface Doctor Winchester is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
