Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Walton-on-Thames, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Call me today to find out how I can restore your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. This high-quality enamel paint hardens in just 24 hours, so you can enjoy your bath again the very next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I can resurface all cast-iron and metal baths, and also acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Many older homes feature metal baths that can last a lifetime with the right care. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. The repairs for chips and dents are included in the overall process with no hidden charges. I can resurface most baths, so contact me today to see if I can restore yours in Walton-on-Thames.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. I will now spray the new enamel surface onto your bath. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This is a very important part of the procedure. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. This may add some extra time to the procedure if there are repairs needed.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling your bath will restore it to a like-new appearance and feel.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Reach out for my professional opinion.
2) Send in pictures of the damage.
3) I’ll send your quote to you right away.
That’s all there is to it! I can handle all your repair needs in Walton-on-Thames.
Need a bath repair? Surface Doctor Walton-on-Thames is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
