Do you need bath re-enamelling or bath resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! With Surface Doctor Wallasey, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Many older homes feature metal baths that can last a lifetime with the right care. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Wallasey.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. After that, I will apply another layer of bonder on top. 5. Now I will spray on the new enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. Masking and protection are vital to ensure no damage occurs to your bathroom. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. This may add some extra time to the procedure if there are repairs needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Once your bath is re-enamelled, it will look and feel just like a new one.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What is the expected longevity of a bath re-enamelling?
Once resurfaced, your bath’s new surface will remain in great condition for years. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Reach out for my professional opinion.
2) Kindly send in images of the damage.
3) I’ll have your quote sent out to you without delay.
It’s that easy! I can assist with all your repair needs in Wallasey.
Surface Doctor Wallasey is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0161 931 9118
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Wallasey and the surrounding areas of Merseyside. Our team is local and ready to help with your repair.
