Is your bath in need of re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Stillorgan, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. No need to change your bath installation, as all work is completed directly in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. I stand behind my bath resurfacing work with a 12-month guarantee.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are a lasting feature of older homes, providing durability for decades. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. You can’t simply apply regular white paint to resurface your bath. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I have sourced a very specialised bonder which creates the most lasting results possible. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. You won’t incur extra costs for this step—it’s included in the resurfacing service. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Stillorgan.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. After that, I will apply another layer of bonder on top. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This can sometimes make the process take a bit longer than if there was no damage to fill.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
How long will a bath re-enamelling last?
Once resurfaced, your bath’s new surface will remain in great condition for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Contact me for my expert insight.
2) Please provide pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
That’s how easy it is! I can support you with all your repair needs in Stillorgan.
Surface Doctor Stillorgan is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0289 570 4570
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Stillorgan and the surrounding areas of Dun-Laoghaire-Rathdown. Our team is local and ready to help with your repair.
