Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. Surface Doctor Stevenage provides a hassle-free bath restoration service that will make your bath look as good as new. Call me today to find out how I can restore your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. I can resurface all cast-iron and metal baths, and also acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. It’s not easy to dispose of an old bath, especially depending on its material. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are usually original features of older houses, and they will last for decades! A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. I have sourced a very specialised bonder which creates the most lasting results possible. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Stevenage.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. I will sand off the top surface of the bath to take it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now I will spray on the new enamel surface to your bath. 6. Next, I’ll buff the surface to a high shine. 7. Now wait 24 hours before using your bath again and it will look brand new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. All of my work is guaranteed for 12 months for your peace of mind.
1) Call me today for my expert evaluation.
2) Send in pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s how easy it is! I can support you with all your repair needs in Stevenage.
Surface Doctor Stevenage is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0345 017 0787
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
We serve Stevenage and the surrounding areas of Hertfordshire. Our team is local and ready to help with your repair.
