Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. Here at Surface Doctor Southborough, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I offer resurfacing services for cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Metal baths are usually original features of older houses, and they will last for decades! A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. This is all included in the process and there won't be any extra charges for this. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Southborough.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. I will then apply another layer of bonder over this. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This is a very important part of the procedure. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
With years of experience in bath resurfacing, I can restore your bath to its original condition. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
How long will a bath re-enamelling last?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Reach out for my professional opinion.
2) Kindly send in images of the damage.
3) I’ll make sure your quote is sent to you promptly.
It’s that easy! I can assist with all your repair needs in Southborough.
If you need bath repairs, Surface Doctor Southborough is one of the leading companies in your area—call me today at 0345 017 0787.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
