Does your bath need resurfacing or re-enamelling? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. At Surface Doctor Ruthin, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. No need to change your bath installation, as all work is completed directly in your bathroom. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I can resurface all cast-iron and metal baths, and also acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. Getting rid of an old bath is not as straightforward as many people think. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. Repairs to chips and dents are included in the resurfacing service with no additional cost. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Ruthin.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. I will sand off the top surface of the bath to take it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Next, I will apply an additional layer of bonder over the surface. 5. Next, I will apply a fresh enamel surface to your bath. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. Masking and protection are vital to ensure no damage occurs to your bathroom. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What is the expected longevity of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Call me for my expert opinion.
2) Send in pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
That’s all there is to it! I can handle all your repair needs in Ruthin.
Need a bath repair? Surface Doctor Ruthin is a leading hard surface repair company in your area—call me at 0161 931 9118 now.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Ruthin and the surrounding areas of Denbighshire. Our team is local and ready to help with your repair.
