Is your bath in need of re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! At Surface Doctor Rowlands-Gill, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I can resurface all cast-iron and metal baths, and also acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. I offer a 12-month guarantee on my bath resurfacing services.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Many older homes feature metal baths that can last a lifetime with the right care. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. You can’t simply apply regular white paint to resurface your bath. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I have sourced a very specialised bonder which creates the most lasting results possible. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
With my in-situ resurfacing service, you don’t need to remove or transport your bath—everything is done in your bathroom. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. You won’t incur extra costs for this step—it’s included in the resurfacing service. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Rowlands-Gill.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. Next, I will apply an additional layer of bonder over the surface. 5. I will now spray the new enamel surface onto your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What’s the lifespan of a bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Reach out for my professional opinion.
2) Send in pictures of the damage.
3) I'll get your quote sent out to you then and there.
It’s that easy! I can assist with all your repair needs in Rowlands-Gill.
Need a bath repair? Surface Doctor Rowlands-Gill is a leading hard surface repair company in your area—call me at 0161 931 9118 now.
Count on me for expert bath and sink repairs in your kitchen or bathroom. I’m dedicated to providing the best repairs. Call me today for any questions about what I can fix.
