Does your bath need resurfacing or re-enamelling? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. At Surface Doctor Ringwood, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Call me today to find out how I can restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I can resurface all cast-iron and metal baths, and also acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing is guaranteed for 12 months.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Getting rid of an old bath is not as straightforward as many people think. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. I can resurface most baths, so contact me today to see if I can restore yours in Ringwood.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This is a very important part of the procedure. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. This may add some extra time to the procedure if there are repairs needed.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Once your bath is re-enamelled, it will look and feel just like a new one.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What’s the lifespan of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me for my expert opinion.
2) Send over pictures of the damage.
3) I’ll have your quote sent out to you without delay.
It's that simple! I can help you with all of your repair needs in Ringwood.
Surface Doctor Ringwood is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0345 017 0787
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Ringwood and the surrounding areas of Hampshire. Our team is local and ready to help with your repair.
