Does your bath need resurfacing or re-enamelling? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Plymouth, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. I stand behind my bath resurfacing work with a 12-month guarantee.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. It’s not easy to dispose of an old bath, especially depending on its material. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are often classic features of older homes and can last for many decades. When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. There are no extra charges for this step; it’s all part of the resurfacing process. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Plymouth.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. I will then apply another layer of bonder over this. 5. Now I will spray on the new enamel surface to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. It’s essential to protect surrounding surfaces, as overspray could cause damage. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Give me a call for my expert advice.
2) Please provide pictures of the damage.
3) Your quote will be sent to you immediately.
That’s how easy it is! I can support you with all your repair needs in Plymouth.
As one of the top hard surface repair companies in Plymouth, call me now at 01392 300 885 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Plymouth and the surrounding areas of Devon. Our team is local and ready to help with your repair.
