Does your bath need resurfacing or re-enamelling? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Oswestry, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. You won’t have to worry about altering your bath installation as the process is done in your bathroom. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I can resurface all cast-iron and metal baths, and also acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Metal baths are usually original features of older houses, and they will last for decades! When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. This is all included in the process and there won't be any extra charges for this. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Oswestry.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. I will sand off the top surface of the bath to take it back to the metal. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This is a very important part of the procedure. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. Repairing any chips and dents can take additional time, but ensures a better outcome.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
What is the expected longevity of a bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me today for my expert evaluation.
2) Please send pictures of the damage.
3) Your quote will be sent to you immediately.
It’s as simple as that! I’m here to help with all your repair needs in Oswestry.
As one of the top hard surface repair companies in Oswestry, call me now at 0121 673 8007 if you need bath repairs.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
