Are you looking for bath re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Surface Doctor Nelson provides a hassle-free bath restoration service that will make your bath look as good as new. Give me a call now to see if I can help you with your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. This is all done in your bathroom so there is no messing with your bath installation or anything like that. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I can resurface all cast-iron and metal baths, and also acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. I offer a 12-month guarantee on my bath resurfacing services.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
I use commercial-grade materials to resurface your bath, which are not available to the general public. You can’t simply apply regular white paint to resurface your bath. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. Repairs to chips and dents are included in the resurfacing service with no additional cost. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Nelson.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. I will now spray the new enamel surface onto your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This is a very important part of the procedure. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. Choosing to repair and restore your bath means you're contributing less to landfill waste. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
How durable is bath re-enamelling?
Once resurfaced, your bath’s new surface will remain in great condition for years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Reach out for my professional opinion.
2) Send in pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Nelson.
Need a bath repair? Surface Doctor Nelson is a leading hard surface repair company in your area—call me at 0161 931 9118 now.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
