Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Larne, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. You won’t have to worry about altering your bath installation as the process is done in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. I stand behind my bath resurfacing work with a 12-month guarantee.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. When it comes to baths, getting rid of the old one isn’t a quick or easy task. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Many older homes feature metal baths that can last a lifetime with the right care. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. You won’t incur extra costs for this step—it’s included in the resurfacing service. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Larne.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now I will spray on the new enamel surface to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This is a very important part of the procedure. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Choosing to repair and restore your bath means you're contributing less to landfill waste. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What’s the lifespan of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Contact me for my expert insight.
2) Send in pictures of the damage.
3) I'll get your quote sent out to you then and there.
That’s how easy it is! I can support you with all your repair needs in Larne.
Surface Doctor Larne is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0289 570 4570
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
