Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. Surface Doctor Hakinge provides a hassle-free bath restoration service that will make your bath look as good as new. Give me a call now to see if I can help you with your bath.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Traditional metal baths are common in older houses and can last for decades with proper maintenance. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Hakinge.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Next, I will apply an additional layer of bonder over the surface. 5. I will now spray the new enamel surface onto your bath. 6. Next, I’ll buff the surface to a high shine. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How long will a bath re-enamelling last?
The new surface of your bath will last for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Call me for my expert opinion.
2) Send over pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Hakinge.
Call Surface Doctor Hakinge for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0345 017 0787.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Hakinge and the surrounding areas of Kent. Our team is local and ready to help with your repair.
