Are you looking for bath re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Here at Surface Doctor Frinton-On-Sea, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. No need to change your bath installation, as all work is completed directly in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. I stand behind my bath resurfacing work with a 12-month guarantee.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are usually original features of older houses, and they will last for decades! When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Frinton-On-Sea.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now I will spray on the new enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What is the expected longevity of a bath re-enamelling?
The new surface of your bath will last for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Contact me for my expert insight.
2) Send over pictures of the damage.
3) Your quote will be sent to you immediately.
It's that simple! I can help you with all of your repair needs in Frinton-On-Sea.
Surface Doctor Frinton-On-Sea is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0345 017 0787
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
