Are you looking for bath re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. Here at Surface Doctor Fleetwood, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Call me today to find out how I can restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Many older homes feature metal baths that can last a lifetime with the right care. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. This is all included in the process and there won't be any extra charges for this. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Fleetwood.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. After that, I will apply another layer of bonder on top. 5. Now I will spray on the new enamel surface to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This can sometimes make the process take a bit longer than if there was no damage to fill.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. Once your bath is re-enamelled, it will look and feel just like a new one.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Choosing to repair and restore your bath means you're contributing less to landfill waste. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long does a re-enamelled bath last?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
Hear from my satisfied customers about their bath resurfacing:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Amelia Parker
Lancashire
Material Type: Enamelled Bath | Service: Bath Restoration
Melissa Walker
Fleetwood, FY7, Lancashire
Material Type: Roll Top Bath | Service: Bath Restoration
Courtney Howard
Fleetwood, FY7, Lancashire
Material Type: Roll Top Bath | Service: Bath Re-Enamelling
Lillian Cooper
Lancashire
Material Type: Cast Iron Bath | Service: Full Bath Restoration
1) Call me for my expert opinion.
2) Please send pictures of the damage.
3) Your quote will be sent to you immediately.
That’s all there is to it! I can handle all your repair needs in Fleetwood.
As one of the top hard surface repair companies in Fleetwood, call me now at 0161 931 9118 if you need bath repairs.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Fleetwood and the surrounding areas of Lancashire. Our team is local and ready to help with your repair.
