Do you need bath re-enamelling or bath resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. Here at Surface Doctor Ferndown, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. This high-quality enamel paint hardens in just 24 hours, so you can enjoy your bath again the very next day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I can resurface all cast-iron and metal baths, and also acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. When it comes to baths, getting rid of the old one isn’t a quick or easy task. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Metal baths are usually original features of older houses, and they will last for decades! When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. You can’t simply apply regular white paint to resurface your bath. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. Repairs to chips and dents are included in the resurfacing service with no additional cost. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Ferndown.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How long does a re-enamelled bath last?
Once resurfaced, your bath’s new surface will remain in great condition for years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Call me for my expert opinion.
2) Please send pictures of the damage.
3) I'll get your quote sent out to you then and there.
It’s that easy! I can assist with all your repair needs in Ferndown.
If you need bath repairs, Surface Doctor Ferndown is one of the leading companies in your area—call me today at 01392 300 885.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Ferndown and the surrounding areas of Dorset. Our team is local and ready to help with your repair.
