Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Fareham, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Get in touch now to see how I can help restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I offer a 12-month guarantee on my bath resurfacing services.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. You simply can't just use normal white paint to paint the surface. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Fareham.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. I will then apply a layer of our specialized bonder and carefully fill in any chips, cracks, or holes in the bath. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. Masking and protection are vital to ensure no damage occurs to your bathroom. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What’s the lifespan of a bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me today for my expert evaluation.
2) Send in pictures of the damage.
3) I'll get your quote sent out to you then and there.
That’s all there is to it! I can handle all your repair needs in Fareham.
As one of the top hard surface repair companies in Fareham, call me now at 0345 017 0787 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
