Is your bath in need of re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Here at Surface Doctor Chard, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Call me today to find out how I can restore your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Removing an old bath isn’t as simple as it may seem. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. You simply can't just use normal white paint to paint the surface. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Chard.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. I will sand off the top surface of the bath to take it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Next, I will apply a fresh enamel surface to your bath. 6. Next, I’ll buff the surface to a high shine. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This important step ensures your bathroom remains safe from any accidental overspray. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. Repairing any chips and dents can take additional time, but ensures a better outcome.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
What is the expected longevity of a bath re-enamelling?
The new surface of your bath will last for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. All of my work is guaranteed for 12 months for your peace of mind.
1) Contact me for my expert insight.
2) Kindly send in images of the damage.
3) I'll get your quote sent out to you then and there.
It’s as simple as that! I’m here to help with all your repair needs in Chard.
If you need bath repairs, Surface Doctor Chard is one of the leading companies in your area—call me today at 0121 673 8007.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Chard and the surrounding areas of Somerset. Our team is local and ready to help with your repair.
