Are you looking for bath re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! With Surface Doctor Bushey, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Get in touch now to see how I can help restore your bath.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. I offer a 12-month guarantee on my bath resurfacing services.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Many older homes feature metal baths that can last a lifetime with the right care. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. You simply can't just use normal white paint to paint the surface. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Bushey.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. I will sand off the top surface of the bath to take it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Next, I will apply an additional layer of bonder over the surface. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This step is crucial to ensure the surrounding areas remain undamaged. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. This may add some extra time to the procedure if there are repairs needed.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What is the expected longevity of a bath re-enamelling?
The new surface of your bath will last for many years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Call me for my expert opinion.
2) Send over pictures of the damage.
3) I'll get your quote sent out to you then and there.
It's that simple! I can help you with all of your repair needs in Bushey.
Need a bath repair? Surface Doctor Bushey is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
Count on me for expert bath and sink repairs in your kitchen or bathroom. I’m dedicated to providing the best repairs. Call me today for any questions about what I can fix.
