Are you looking for bath re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Ballyclare, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are usually original features of older houses, and they will last for decades! Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. This is all included in the process and there won't be any extra charges for this. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Ballyclare.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. I will then apply another layer of bonder over this. 5. Next, I will apply a fresh enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. It’s essential to protect surrounding surfaces, as overspray could cause damage. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. This may add some extra time to the procedure if there are repairs needed.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What’s the lifespan of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me today for my expert evaluation.
2) Send over pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
That’s how easy it is! I can support you with all your repair needs in Ballyclare.
As one of the top hard surface repair companies in Ballyclare, call me now at 0289 570 4570 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Ballyclare and the surrounding areas of County-Antrim. Our team is local and ready to help with your repair.
