Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Polwarth, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I can resurface all cast-iron and metal baths, and also acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I offer a 12-month guarantee on my bath resurfacing services.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Polwarth.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. Next, I will apply an additional layer of bonder over the surface. 5. Next, I will apply a fresh enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This step is crucial to ensure the surrounding areas remain undamaged. Any chips or dents in your bath must be repaired first, as the new enamel surface won’t adhere properly if these aren’t fixed. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
How durable is bath re-enamelling?
The new surface of your bath will last for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
Check out what my customers are saying about my bath re-enamelling work:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Lucy Harrison
Polwarth, EH11, City-of-Edinburgh
Material Type: Enamelled Bath | Service: Bath Re-Enamelling & Colour Change
Danielle White
Polwarth, City-of-Edinburgh
Material Type: Acrylic Bath | Service: Bath Chip Repair & Re-Enamelling
Paige Simmons
Polwarth, City-of-Edinburgh
Material Type: Steel Bath | Service: Bath Re-Enamelling & Colour Change
Lillian Cooper
Polwarth, City-of-Edinburgh
Material Type: Cast Iron Bath | Service: Bath Restoration
1) Give me a call for my expert advice.
2) Send over pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Polwarth.
As one of the top hard surface repair companies in Polwarth, call me now at 0131 278 3890 if you need bath repairs.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Polwarth and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
