Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. With Surface Doctor Hakinge, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Get in touch now to see how I can help restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. You won’t have to worry about altering your bath installation as the process is done in your bathroom. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. I can resurface all cast-iron and metal baths, and also acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. You can’t simply apply regular white paint to resurface your bath. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. I’ve trusted my preferred materials for years, knowing they consistently produce excellent, high-quality repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. The repairs for chips and dents are included in the overall process with no hidden charges. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Hakinge.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. After that, I will apply another layer of bonder on top. 5. At this stage, I will apply a new enamel coating to your bath. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. Repairing any chips and dents can take additional time, but ensures a better outcome.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Once your bath is re-enamelled, it will look and feel just like a new one.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What’s the lifespan of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Call me for my expert opinion.
2) Send over pictures of the damage.
3) I’ll send your quote to you right away.
That’s how easy it is! I can support you with all your repair needs in Hakinge.
Need a bath repair? Surface Doctor Hakinge is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
We serve Hakinge and the surrounding areas of Kent. Our team is local and ready to help with your repair.
