Does your bath need resurfacing or re-enamelling? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. With Surface Doctor Frinton-On-Sea, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Contact me today to discuss how I can help with your bath restoration.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. No need to change your bath installation, as all work is completed directly in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I offer resurfacing services for cast-iron, metal, and acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. I offer a 12-month guarantee on my bath resurfacing services.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Removing an old bath isn’t as simple as it may seem. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. You simply can't just use normal white paint to paint the surface. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. There are no extra charges for this step; it’s all part of the resurfacing process. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Frinton-On-Sea.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. I will then apply a layer of our specialized bonder and carefully fill in any chips, cracks, or holes in the bath. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. At this stage, I will apply a new enamel coating to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This important step ensures your bathroom remains safe from any accidental overspray. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. This may add some extra time to the procedure if there are repairs needed.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Reach out for my professional opinion.
2) Send in pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s how easy it is! I can support you with all your repair needs in Frinton-On-Sea.
As one of the top hard surface repair companies in Frinton-On-Sea, call me now at 0345 017 0787 if you need bath repairs.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
We serve Frinton-On-Sea and the surrounding areas of Essex. Our team is local and ready to help with your repair.
