
Surface Doctor Springburn is here to handle all your ceramic sink repair needs. With more than 20 years of experience, we can repair chips, cracks, scratches, and holes. Call now to get a free quote for your ceramic sink repair.
Since ceramic sinks are more porous than composite or porcelain, chips or cracks should be repaired quickly to avoid water absorption and further damage such as mould. Our repair process is simple and effective for fixing chips and cracks. With years of experience, we can restore your ceramic sink fast. Located in Springburn, we can reach you quickly for a ceramic sink repair when you need it.
1. First, we assess the damage to your sink and then select the most effective way to repair it.
2. To ensure proper adhesion, we apply a specialised bonder to the damaged area. 3. The damaged area is filled and sanded down so the surface is smooth without any bumps. 5. The technician will now colour match the new enamel to your sink and spray this on using a fine spray gun. 6. Give it 24 hours to fully cure and set.
High-quality clay is used to create ceramic sinks, which are fired at extremely high temperatures and coated with a durable, non-porous glaze or enamel porcelain coating.
Our expert repair process aims for high-quality results that you won't notice with regular use of your ceramic sink.
Our repair materials are chosen to ensure that the repair is long-lasting, capable of withstanding the daily use of sinks, baths, or shower trays. The process of blending a repair into the surface requires a high level of expertise to make the repair as seamless as possible. Repairing your sink is always more cost-effective than replacing the entire unit. It also causes much less disruption compared to a full replacement. In cases of severe damage, we might suggest resurfacing the sink. However, for structural damage, we would recommend replacing the sink instead of attempting a repair. DIY Repair Kits will not create a lasting repair as the materials that are provided are not good quality and it will be very hard to get a colour match. We do not recommend trying these as they end up being a waste of money. It's obviously up to you if you want to try it, but there is a reason why we are still in business as a professional repair company.What’s the typical time frame for completing the repair?
For a couple of simple chip repairs, the process takes around 1-2 hours. However, larger crack or hole repairs will take more time, and sink resurfacing will typically take about 4-5 hours. After any repair, it’s important to wait 24 hours for the sink to fully cure and harden.





1) Reach out to our friendly team by dialing our number.
2) Kindly send us a picture of the damage.
3) We’ll provide you with a free quote that includes a fixed price for your repair.
We’re here to assist with all your hard surface repair needs.
For many years, Surface Doctor Springburn has been repairing sinks and baths and has earned its place as one of the top hard surface repair companies in Springburn. If you need a ceramic sink repair, call us today at (Free Phone) 0131 278 3890.
If you need a ceramic sink repair, we’re ready to help. Call us now for a free quote.