Surface Doctor Billingshurst is here to handle all your ceramic sink repair needs. With more than 20 years of experience, we can repair chips, cracks, scratches, and holes. Call now to get a free quote for your ceramic sink repair.
Ceramic sinks are more porous than composite or porcelain, which means that when they chip or crack, it's important to repair them immediately to prevent water absorption and further damage like mould. Chips and cracks are easily fixed with our step-by-step repair process. With years of experience, we can get your ceramic sink back to its best in no time. As we are based in Billingshurst, we can respond quickly to your ceramic sink repair needs.
1. We’ll inspect the damage to your sink and decide on the best repair method.
2. To ensure proper adhesion, we apply a specialised bonder to the damaged area. 3. A second layer of bonder is applied over the filler. 5. The technician will colour match the new enamel to your sink and carefully spray it on using a fine spray gun. 6. Leave it undisturbed for 24 hours to ensure it fully cures and sets.
Made from a mixture of high-quality clay, ceramic sinks are fired at very high temperatures and then coated with a durable, non-porous glaze or enamel porcelain coating.
We strive to provide a top-quality repair for your ceramic sink that remains unnoticeable during everyday use.
Our repair materials are chosen to ensure that the repair is long-lasting, capable of withstanding the daily use of sinks, baths, or shower trays. The process of blending a repair into the surface requires a high level of expertise to make the repair as seamless as possible. Repairing your sink is always more cost-effective than replacing the entire unit. It also causes much less disruption compared to a full replacement. In cases of severe damage, we might suggest resurfacing the sink. However, for structural damage, we would recommend replacing the sink instead of attempting a repair. While DIY Repair Kits may seem like an option, they don’t create lasting repairs because of poor-quality materials and a difficult colour match process. We don’t suggest using them as they typically waste your money. It’s up to you, but there’s a reason professional repair companies like us continue to thrive.How much time does the repair usually take?
A chip repair or two should take about 1-2 hours, but larger crack or hole repairs will take longer. Sink resurfacing will take approximately 4-5 hours to finish. After all repairs, we recommend waiting 24 hours for the repair to fully cure and harden before using the sink.
1) Dial our number to speak to our friendly team.
2) Provide us with a photo of the damage.
3) We'll offer you a free quote along with a fixed price for your repair.
Allow us to help with all your hard surface repair needs.
With years of experience in sink and bath repairs, Surface Doctor Billingshurst is one of the leading hard surface repair companies in Billingshurst. If you need a ceramic sink repair, give us a call now on (Free Phone) 0345 017 0787.
If you need a ceramic sink repair, we’re ready to help. Call us now for a free quote.
