Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Here at Surface Doctor Welwyn-Garden-City, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Call me today to find out how I can restore your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. I stand behind my bath resurfacing work with a 12-month guarantee.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. Removing an old bath isn’t as simple as it may seem. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Welwyn-Garden-City.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. After that, I will apply another layer of bonder on top. 5. At this stage, I will apply a new enamel coating to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. Masking and protection are vital to ensure no damage occurs to your bathroom. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
With years of experience in bath resurfacing, I can restore your bath to its original condition. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How long does a re-enamelled bath last?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Call me for my expert opinion.
2) Send in pictures of the damage.
3) I’ll send your quote to you right away.
It’s as simple as that! I’m here to help with all your repair needs in Welwyn-Garden-City.
If you need bath repairs, Surface Doctor Welwyn-Garden-City is one of the leading companies in your area—call me today at 0345 017 0787.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
