Are you looking for bath re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. With Surface Doctor Ottery St Mary, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Metal baths are often classic features of older homes and can last for many decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. I have sourced a very specialised bonder which creates the most lasting results possible. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. I can resurface most baths, so contact me today to see if I can restore yours in Ottery St Mary.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. I will sand off the top surface of the bath to take it back to the metal. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. Next, I will apply an additional layer of bonder over the surface. 5. I will now spray the new enamel surface onto your bath. 6. I will then buff this down to make it super shiny. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This is a very important part of the procedure. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. Repairing any chips and dents can take additional time, but ensures a better outcome.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Once your bath is re-enamelled, it will look and feel just like a new one.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What is the expected longevity of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Reach out for my professional opinion.
2) Kindly send in images of the damage.
3) I'll get your quote sent out to you then and there.
That’s how easy it is! I can support you with all your repair needs in Ottery St Mary.
Surface Doctor Ottery St Mary is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 01392 300 885
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Ottery St Mary and the surrounding areas of Devon. Our team is local and ready to help with your repair.
