Are you looking for bath re-enamelling or resurfacing? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. With Surface Doctor Ebbw-Vale, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing is guaranteed for 12 months.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. When it comes to baths, getting rid of the old one isn’t a quick or easy task. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are often classic features of older homes and can last for many decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. You won’t incur extra costs for this step—it’s included in the resurfacing service. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Ebbw-Vale.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. After that, I will apply another layer of bonder on top. 5. I will now spray the new enamel surface onto your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
It usually takes 5-7 hours to resurface or re-enamel a bath. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long does a re-enamelled bath last?
Once resurfaced, your bath’s new surface will remain in great condition for years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Contact me for my expert insight.
2) Kindly send in images of the damage.
3) I'll get your quote sent out to you then and there.
That’s all there is to it! I can handle all your repair needs in Ebbw-Vale.
If you need bath repairs, Surface Doctor Ebbw-Vale is one of the leading companies in your area—call me today at 0121 673 8007.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
