Are you looking for bath re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. With Surface Doctor Dun Laoghaire, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Get in touch now to see how I can help restore your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. This high-quality enamel paint hardens in just 24 hours, so you can enjoy your bath again the very next day. I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I offer a 12-month guarantee on my bath resurfacing services.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are often classic features of older homes and can last for many decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. Repairs to chips and dents are included in the resurfacing service with no additional cost. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Dun Laoghaire.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Next, I will apply an additional layer of bonder over the surface. 5. I will now spray the new enamel surface onto your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. This is a very important part of the procedure. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Re-enamelling your bath will restore it to a like-new appearance and feel.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How long will a bath re-enamelling last?
Once resurfaced, your bath’s new surface will remain in great condition for years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Give me a call for my expert advice.
2) Please provide pictures of the damage.
3) I'll get your quote sent out to you then and there.
It's that simple! I can help you with all of your repair needs in Dun Laoghaire.
Call Surface Doctor Dun Laoghaire for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0289 570 4570.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Dun Laoghaire and the surrounding areas of Dun-Laoghaire-Rathdown. Our team is local and ready to help with your repair.
