Is your bath in need of re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Here at Surface Doctor Chadwell-St-Mary, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Get in touch now to see how I can help restore your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. No need to change your bath installation, as all work is completed directly in your bathroom. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I have sourced a very specialised bonder which creates the most lasting results possible. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. There are no extra charges for this step; it’s all part of the resurfacing process. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Chadwell-St-Mary.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. I will then buff this down to make it super shiny. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. This is a very important part of the procedure. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. This can sometimes make the process take a bit longer than if there was no damage to fill.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
How long does a re-enamelled bath last?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Contact me for my expert insight.
2) Send in pictures of the damage.
3) I’ll send your quote to you right away.
It's that simple! I can help you with all of your repair needs in Chadwell-St-Mary.
If you need bath repairs, Surface Doctor Chadwell-St-Mary is one of the leading companies in your area—call me today at 0345 017 0787.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
