Is your bath in need of re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Bognor-Regis, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Get in touch now to see how I can help restore your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. You can trust my bath resurfacing, which comes with a 12-month guarantee.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Removing an old bath isn’t as simple as it may seem. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Traditional metal baths are common in older houses and can last for decades with proper maintenance. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
With my in-situ resurfacing service, you don’t need to remove or transport your bath—everything is done in your bathroom. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Bognor-Regis.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. I will then apply another layer of bonder over this. 5. At this stage, I will apply a new enamel coating to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
How long will a bath re-enamelling last?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Reach out for my professional opinion.
2) Please send pictures of the damage.
3) I’ll send your quote to you right away.
It’s that easy! I can assist with all your repair needs in Bognor-Regis.
Need a bath repair? Surface Doctor Bognor-Regis is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
