Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. Surface Doctor Wolverhampton provides a hassle-free bath restoration service that will make your bath look as good as new. Call me today to find out how I can restore your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. My bath resurfacing is guaranteed for 12 months.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Getting rid of an old bath is not as straightforward as many people think. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are often classic features of older homes and can last for many decades. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. You simply can't just use normal white paint to paint the surface. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. I’ve trusted my preferred materials for years, knowing they consistently produce excellent, high-quality repairs.
With my in-situ resurfacing service, you don’t need to remove or transport your bath—everything is done in your bathroom. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. There are no extra charges for this step; it’s all part of the resurfacing process. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Wolverhampton.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Now wait 24 hours before using your bath again and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. It’s essential to protect surrounding surfaces, as overspray could cause damage. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. This may add some extra time to the procedure if there are repairs needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
How long will a bath re-enamelling last?
The restored surface of your bath will remain in excellent condition for many years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Call me today for my expert evaluation.
2) Send over pictures of the damage.
3) I’ll send your quote to you right away.
It's that simple! I can help you with all of your repair needs in Wolverhampton.
As one of the top hard surface repair companies in Wolverhampton, call me now at 0121 673 8007 if you need bath repairs.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Wolverhampton and the surrounding areas of West-Midlands. Our team is local and ready to help with your repair.
