Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Wincanton, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I offer resurfacing services for cast-iron, metal, and acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. My bath resurfacing is guaranteed for 12 months.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Traditional metal baths are common in older houses and can last for decades with proper maintenance. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. You won’t incur extra costs for this step—it’s included in the resurfacing service. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Wincanton.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. I will then buff this down to make it super shiny. 7. Now wait 24 hours before using your bath again and it will look brand new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. This can sometimes make the process take a bit longer than if there was no damage to fill.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long will a bath re-enamelling last?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
Check out what my customers are saying about my bath re-enamelling work:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Eleanor Brooks
Somerset
Material Type: Cast Iron Bath | Service: Bath Re-Enamelling & Colour Change
Heather Lee
Wincanton, Somerset
Material Type: Cast Iron Bath | Service: Bath Damage Repair & Re-Enamelling
Jasmine Powell
Wincanton, BA9, Somerset
Material Type: Acrylic Bath | Service: Full Bath Re-Enamelling
Evelyn Turner
Wincanton, BA9, Somerset
Material Type: Enamelled Bath | Service: Bath Surface Restoration
1) Reach out for my professional opinion.
2) Kindly send in images of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Wincanton.
Call Surface Doctor Wincanton for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0121 673 8007.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Wincanton and the surrounding areas of Somerset. Our team is local and ready to help with your repair.
