Do you need bath re-enamelling or bath resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Here at Surface Doctor Warrington, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Get in touch now to see how I can help restore your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. You won’t have to worry about altering your bath installation as the process is done in your bathroom. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I resurface all types of baths including cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are usually original features of older houses, and they will last for decades! When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I use commercial-grade materials to resurface your bath, which are not available to the general public. You can’t simply apply regular white paint to resurface your bath. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. You won’t incur extra costs for this step—it’s included in the resurfacing service. I can resurface most baths, so contact me today to see if I can restore yours in Warrington.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I will then apply another layer of bonder over this. 5. Now I will spray on the new enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Now wait 24 hours before using your bath again and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This may add some extra time to the procedure if there are repairs needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How durable is bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
Hear from my satisfied customers about their bath re-enamelling:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Hannah Cooper
Warrington, WA1, Cheshire
Material Type: Roll Top Bath | Service: Bath Restoration
Rachel Taylor
Cheshire
Material Type: Enamelled Bath | Service: Bath Chip Repair & Re-Enamelling
Madison Perry
Warrington, WA1, Cheshire
Material Type: Acrylic Bath | Service: Bath Restoration
Ivy Foster
Cheshire
Material Type: Roll Top Bath | Service: Bath Restoration
1) Contact me for my expert insight.
2) Send in pictures of the damage.
3) I’ll have your quote sent out to you without delay.
It’s that easy! I can assist with all your repair needs in Warrington.
If you need bath repairs, Surface Doctor Warrington is one of the leading companies in your area—call me today at 0161 931 9118.
Count on me for expert bath and sink repairs in your kitchen or bathroom. I’m dedicated to providing the best repairs. Call me today for any questions about what I can fix.
We serve Warrington and the surrounding areas of Cheshire. Our team is local and ready to help with your repair.
