Is your bath in need of re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. At Surface Doctor Waltham-Abbey, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Call me today to find out how I can restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. You won’t have to worry about altering your bath installation as the process is done in your bathroom. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing is guaranteed for 12 months.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Waltham-Abbey.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now I will spray on the new enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. Repairing any chips and dents can take additional time, but ensures a better outcome.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What is the expected longevity of a bath re-enamelling?
Once resurfaced, your bath’s new surface will remain in great condition for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Reach out for my professional opinion.
2) Please provide pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Waltham-Abbey.
As one of the top hard surface repair companies in Waltham-Abbey, call me now at 0345 017 0787 if you need bath repairs.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
