Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Swanston, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Call me today to find out how I can restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Metal baths are often classic features of older homes and can last for many decades. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I have sourced a very specialised bonder which creates the most lasting results possible. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. There are no extra charges for this step; it’s all part of the resurfacing process. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Swanston.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. I will then apply a layer of our specialized bonder and carefully fill in any chips, cracks, or holes in the bath. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Once your bath is re-enamelled, it will look and feel just like a new one.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What is the expected longevity of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me for my expert opinion.
2) Kindly send in images of the damage.
3) I’ll make sure your quote is sent to you promptly.
It’s that easy! I can assist with all your repair needs in Swanston.
Need a bath repair? Surface Doctor Swanston is a leading hard surface repair company in your area—call me at 0131 278 3890 now.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Swanston and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
