Does your bath need resurfacing or re-enamelling? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Here at Surface Doctor Stenhouse, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. No need to change your bath installation, as all work is completed directly in your bathroom. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. During re-enamelling, I’ll fix any chips or scratches so the new enamel will create a smooth, perfect surface. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. There are no extra charges for this step; it’s all part of the resurfacing process. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Stenhouse.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. I will then apply a layer of our specialized bonder and carefully fill in any chips, cracks, or holes in the bath. 4. I will then apply another layer of bonder over this. 5. Next, I will apply a fresh enamel surface to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This is a very important part of the procedure. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How durable is bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. All of my work is guaranteed for 12 months for your peace of mind.
1) Reach out for my professional opinion.
2) Please send pictures of the damage.
3) I’ll send your quote to you right away.
That’s all there is to it! I can handle all your repair needs in Stenhouse.
Need a bath repair? Surface Doctor Stenhouse is a leading hard surface repair company in your area—call me at 0131 278 3890 now.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Stenhouse and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
