Are you looking for bath re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Surface Doctor Stanley provides a hassle-free bath restoration service that will make your bath look as good as new. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I have sourced a very specialised bonder which creates the most lasting results possible. I’ve trusted my preferred materials for years, knowing they consistently produce excellent, high-quality repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Stanley.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. I will then apply another layer of bonder over this. 5. At this stage, I will apply a new enamel coating to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This is a very important part of the procedure. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What is the expected longevity of a bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. All of my work is guaranteed for 12 months for your peace of mind.
1) Call me for my expert opinion.
2) Kindly send in images of the damage.
3) I'll get your quote sent out to you then and there.
That’s all there is to it! I can handle all your repair needs in Stanley.
As one of the top hard surface repair companies in Stanley, call me now at 0161 931 9118 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Stanley and the surrounding areas of County Durham. Our team is local and ready to help with your repair.
