Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Surface Doctor Springburn provides a hassle-free bath restoration service that will make your bath look as good as new. Call me today to find out how I can restore your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. I offer a 12-month guarantee on my bath resurfacing services.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Metal baths are a lasting feature of older homes, providing durability for decades. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. You can’t simply apply regular white paint to resurface your bath. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Springburn.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. After that, I will apply another layer of bonder on top. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Now wait 24 hours before using your bath again and it will look brand new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. This important step ensures your bathroom remains safe from any accidental overspray. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. This can sometimes make the process take a bit longer than if there was no damage to fill.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Re-enamelling your bath will restore it to a like-new appearance and feel.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
How long will a bath re-enamelling last?
Once resurfaced, your bath’s new surface will remain in great condition for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
Find out what some of my customers think about the bath re-enamelling I’ve completed:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Hannah Cooper
Glasgow-City
Material Type: Enamelled Bath | Service: Bath Surface Restoration
Danielle White
Glasgow-City
Material Type: Roll Top Bath | Service: Bath Chip Repair & Re-Enamelling
Courtney Howard
Springburn, G21, Glasgow-City
Material Type: Acrylic Bath | Service: Bath Restoration
Stella Reed
Glasgow-City
Material Type: Cast Iron Bath | Service: Bath Re-Enamelling & Colour Change
1) Reach out for my professional opinion.
2) Kindly send in images of the damage.
3) I’ll make sure your quote is sent to you promptly.
It’s as simple as that! I’m here to help with all your repair needs in Springburn.
Call Surface Doctor Springburn for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0131 278 3890.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Springburn and the surrounding areas of Glasgow-City. Our team is local and ready to help with your repair.
