Are you looking for bath re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor South Queensferry, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I can resurface all cast-iron and metal baths, and also acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Traditional metal baths are common in older houses and can last for decades with proper maintenance. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. You simply can't just use normal white paint to paint the surface. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. This is all included in the process and there won't be any extra charges for this. I can resurface most baths, so contact me today to see if I can restore yours in South Queensferry.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. Next, I will apply an additional layer of bonder over the surface. 5. At this stage, I will apply a new enamel coating to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This important step ensures your bathroom remains safe from any accidental overspray. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How long will a bath re-enamelling last?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Reach out for my professional opinion.
2) Please send pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in South Queensferry.
Surface Doctor South Queensferry is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0131 278 3890
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve South Queensferry and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
