Is your bath in need of re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. With Surface Doctor Shettleston, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Contact me today to discuss how I can help with your bath restoration.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. You won’t have to worry about altering your bath installation as the process is done in your bathroom. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I resurface all types of baths including cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Getting rid of an old bath is not as straightforward as many people think. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are a lasting feature of older homes, providing durability for decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. I’ve trusted my preferred materials for years, knowing they consistently produce excellent, high-quality repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. There are no extra charges for this step; it’s all part of the resurfacing process. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Shettleston.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How long will a bath re-enamelling last?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
See what some of my customers have to say about my bath re-enamelling services:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Emma Collins
Shettleston, Glasgow-City
Material Type: Acrylic Bath | Service: Bath Re-Enamelling
Danielle White
Glasgow-City
Material Type: Steel Bath | Service: Bath Damage Repair & Re-Enamelling
Chloe Bennett
Shettleston, Glasgow-City
Material Type: Cast Iron Bath | Service: Bath Re-Enamelling
Violet Brooks
Shettleston, G32, Glasgow-City
Material Type: Steel Bath | Service: Bath Re-Enamelling
1) Call me today for my expert evaluation.
2) Please provide pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
That’s all there is to it! I can handle all your repair needs in Shettleston.
As one of the top hard surface repair companies in Shettleston, call me now at 0131 278 3890 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Shettleston and the surrounding areas of Glasgow-City. Our team is local and ready to help with your repair.
