Are you looking for bath re-enamelling or resurfacing? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. At Surface Doctor Saughton, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to see if I can help you with your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. You can trust my bath resurfacing, which comes with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. After removal, redoing the tiling, reinstalling taps and drains, and potentially replacing the flooring are necessary. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Many older homes feature metal baths that can last a lifetime with the right care. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. You can’t simply apply regular white paint to resurface your bath. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. I have sourced a very specialised bonder which creates the most lasting results possible. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. The repairs for chips and dents are included in the overall process with no hidden charges. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Saughton.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. I will sand off the top surface of the bath to take it back to the metal. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. Next, I will apply an additional layer of bonder over the surface. 5. At this stage, I will apply a new enamel coating to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This important step ensures your bathroom remains safe from any accidental overspray. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
The new surface of your bath will last for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. For your peace of mind, all of my work comes with a 12-month guarantee.
Check out what my customers are saying about my bath re-enamelling work:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Victoria Reed
Saughton, EH11, City-of-Edinburgh
Material Type: Cast Iron Bath | Service: Bath Re-Enamelling
Jessica Brown
Saughton, EH11, City-of-Edinburgh
Material Type: Steel Bath | Service: Bath Re-Enamelling
Zoe Richardson
City-of-Edinburgh
Material Type: Steel Bath | Service: Bath Re-Enamelling
Nora Bennett
Saughton, EH11, City-of-Edinburgh
Material Type: Cast Iron Bath | Service: Bath Restoration
1) Contact me for my expert insight.
2) Kindly send in images of the damage.
3) I'll get your quote sent out to you then and there.
It’s as simple as that! I’m here to help with all your repair needs in Saughton.
Call Surface Doctor Saughton for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0131 278 3890.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
We serve Saughton and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
