Are you looking for bath re-enamelling or resurfacing? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. With Surface Doctor Ryton, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Contact me today to discuss how I can help with your bath restoration.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. This is all done in your bathroom so there is no messing with your bath installation or anything like that. This high-quality enamel paint hardens in just 24 hours, so you can enjoy your bath again the very next day. I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. My bath resurfacing is guaranteed for 12 months.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Ryton.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now I will spray on the new enamel surface to your bath. 6. I will then buff this down to make it super shiny. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Once your bath is re-enamelled, it will look and feel just like a new one.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How long does a re-enamelled bath last?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Contact me for my expert insight.
2) Send in pictures of the damage.
3) I'll get your quote sent out to you then and there.
That’s all there is to it! I can handle all your repair needs in Ryton.
Need a bath repair? Surface Doctor Ryton is a leading hard surface repair company in your area—call me at 0161 931 9118 now.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
