Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. At Surface Doctor Redbourn, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. You can trust my bath resurfacing, which comes with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. It’s not easy to dispose of an old bath, especially depending on its material. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. The repairs for chips and dents are included in the overall process with no hidden charges. There are very few baths that I can’t resurface—call me today to find out if I can restore your bath in Redbourn.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. I will then apply another layer of bonder over this. 5. Next, I will apply a fresh enamel surface to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This is a very important part of the procedure. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What is the expected longevity of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Contact me for my expert insight.
2) Kindly send in images of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Redbourn.
Call Surface Doctor Redbourn for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0345 017 0787.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
We serve Redbourn and the surrounding areas of Hertfordshire. Our team is local and ready to help with your repair.
