Do you need bath re-enamelling or bath resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. Here at Surface Doctor Market-Drayton, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Get in touch now to see how I can help restore your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Removing an old bath isn’t as simple as it may seem. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Metal baths are usually original features of older houses, and they will last for decades! Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Market-Drayton.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This step is crucial to ensure the surrounding areas remain undamaged. Any chips or dents in your bath must be repaired first, as the new enamel surface won’t adhere properly if these aren’t fixed. This can sometimes make the process take a bit longer than if there was no damage to fill.
With years of experience in bath resurfacing, I can restore your bath to its original condition. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long will a bath re-enamelling last?
Once resurfaced, your bath’s new surface will remain in great condition for years. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. All of my work is guaranteed for 12 months for your peace of mind.
1) Call me for my expert opinion.
2) Send in pictures of the damage.
3) I'll get your quote sent out to you then and there.
That’s all there is to it! I can handle all your repair needs in Market-Drayton.
Need a bath repair? Surface Doctor Market-Drayton is a leading hard surface repair company in your area—call me at 0121 673 8007 now.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
