Is your bath in need of re-enamelling or resurfacing? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. Here at Surface Doctor Malahide, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Get in touch now to see how I can help restore your bath.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. My bath resurfacing is guaranteed for 12 months.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Getting rid of an old bath is not as straightforward as many people think. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Metal baths are usually original features of older houses, and they will last for decades! Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. You can’t simply apply regular white paint to resurface your bath. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. There are no extra charges for this step; it’s all part of the resurfacing process. I can resurface most baths, so contact me today to see if I can restore yours in Malahide.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. After that, I will apply another layer of bonder on top. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. This can sometimes make the process take a bit longer than if there was no damage to fill.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Once your bath is re-enamelled, it will look and feel just like a new one.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Choosing to repair and restore your bath means you're contributing less to landfill waste. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What’s the lifespan of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
Check out what my customers are saying about my bath re-enamelling work:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Amelia Parker
Malahide, Dublin
Material Type: Enamelled Bath | Service: Full Bath Re-Enamelling
Stephanie Jackson
Malahide, D13, Dublin
Material Type: Cast Iron Bath | Service: Bath Damage Repair & Re-Enamelling
Brianna Jenkins
Dublin
Material Type: Acrylic Bath | Service: Bath Re-Enamelling
Beatrice Hayes
Malahide, Dublin
Material Type: Cast Iron Bath | Service: Bath Restoration
1) Contact me for my expert insight.
2) Send over pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
It’s as simple as that! I’m here to help with all your repair needs in Malahide.
If you need bath repairs, Surface Doctor Malahide is one of the leading companies in your area—call me today at 0289 570 4570.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
We serve Malahide and the surrounding areas of Dublin. Our team is local and ready to help with your repair.
