Are you looking for bath re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Maghull, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Get in touch now to see how I can help restore your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. This is all done in your bathroom so there is no messing with your bath installation or anything like that. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! During re-enamelling, I’ll fix any chips or scratches so the new enamel will create a smooth, perfect surface. I resurface all types of baths including cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Traditional metal baths are common in older houses and can last for decades with proper maintenance. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I use commercial-grade materials to resurface your bath, which are not available to the general public. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. Repairs to chips and dents are included in the resurfacing service with no additional cost. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Maghull.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
With years of experience in bath resurfacing, I can restore your bath to its original condition. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
What is the expected longevity of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Contact me for my expert insight.
2) Please provide pictures of the damage.
3) I’ll send your quote to you right away.
That’s all there is to it! I can handle all your repair needs in Maghull.
As one of the top hard surface repair companies in Maghull, call me now at 0161 931 9118 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Maghull and the surrounding areas of Merseyside. Our team is local and ready to help with your repair.
