Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. Here at Surface Doctor Lightwater, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. This high-quality enamel paint hardens in just 24 hours, so you can enjoy your bath again the very next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. My bath resurfacing is guaranteed for 12 months.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Metal baths are usually original features of older houses, and they will last for decades! Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. There are no extra charges for this step; it’s all part of the resurfacing process. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Lightwater.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. I will then apply another layer of bonder over this. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. I will then buff this down to make it super shiny. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. It’s essential to protect surrounding surfaces, as overspray could cause damage. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. This may add some extra time to the procedure if there are repairs needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Choosing to repair and restore your bath means you're contributing less to landfill waste. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What is the expected longevity of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me for my expert opinion.
2) Please provide pictures of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Lightwater.
Need a bath repair? Surface Doctor Lightwater is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Lightwater and the surrounding areas of Surrey. Our team is local and ready to help with your repair.
